2017年10月24日星期二

specific surface area and pore volume analyzer installed at National Nanotechnology Center

a new set of specific surface area and pore volume analyzer was installed at National Nanotechnology Center of Thailand, this analyzer uses nitrogen adsorption principle to test nanomaterials BET surface area, mesopore size, micropore size and pore volume. Visit more by www.jinaipu.com -- Gold APP Instruments China.



BET surface area and pore size distribution analyzer was successfully installed at Thammasat University


V-Sorb 2800P fully automatic BET surface area and pore size distribution analyzer was

successfully installed at Thammasat University,this analyzer produced by GOLD APP

INSTRUMENTS CHINA (www.jinaipu.com) and adopted volumetric adsorption principle to test

samples BET surface area, mesopore and micropore size, pore volume and pore size

distribution.


2017年6月28日星期三

Surface Area and Porosimetry Analyzer Finished Installation at Universiti Tun Hussein Onn Malaysia


Gold APP Instruments Corporation China had finished installation and calibration work of one set V-Sorb 4800P high throughput surface area and porosimetry analyzer at Universiti Tun Hussein Onn Malaysia under helps of Mr. Melvin from Crest NanoSolutions (M) Sdn Bhd.

After 5 hours direct flight trip, engineer reached Kuala Lumpur International Airport safely and met Mr. Melvin who was already waiting outside of the exit door. Then drove car to UTHM without stop. Thanks to UTHM helps, engineer finished analyzer and separate degasser installation at that day. Here are few pictures show UTHM outlook and V-Sorb 4800P surface area and porosimetry analyzer installed at their lab.

 


In following few days, our engineer got the communication between analyzer and computer succeed, used Reference Materials carbon black and sieve to calibrate analyzer surface area and pore size working ability, ensure the surface area and porosimetry analyzer was in well condition and can begin to test UTHM own samples. Then gave a comprehensive introduction and training of the whole system. Finally, UTHM spoke highly of the whole procedures and analyzer. 

 

The V-Sorb 4800P analyzer with 4 testing ports, all can test surface area, mesopore and micropore. A separated degasser with 4 ports, can pretreat samples efficiently. Stainless steel manifold system with hard seal VCR sealing, plus pneumatic valves system ensure no leakage happen. Germany branded vacuum pump can help to reach a very low ultimate pressure, Japan branded 4 liter stainless steel Dewar can support at least 72 hours without refilling LN2. All these make the V-Sorb 4800P surface area and porosimetry analyzer to be the best choice of researching lab like UTHM.

 For more information about surface area and pore size analyzer, gas pycnometer helium density analyzer, high pressure volumetric adsorption analyzer etc, pls visit www.jinaipu.com or email us at sales@jinaipu.com .

2017年4月7日星期五

BET surface area and pore size distribution test for sieve 5A






BET surface area and pore size distribution test for sieve 5A by V-Sorb 2800P physisorption analyzer

2017年4月4日星期二

Surface Area Analyzer Order from King Mongkut's University of Technology Thonburi


Under the help from Puditec company, a new order came from King Mongkut's University of Technology Thonburi for surface area analyzer V-Sorb 2800P which with ability to test single and multi-point BET surface area, Langmuir surface area, t-plot surface area, BJH, HK, SF, DR, DA etc pore size, pore volume, pore size distribution data.

 

King Mongkut's University of Technology Thonburi (KMUTT, มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี) is an engineering and technology academy in Thailand, focusing on teaching, researching as well as serving industry. It is located in Thung Khru district, Bangkok and was founded on April 18, 1960.

 

The V-Sorb 2800P surface area analyzer by using static volumetric principle to measure samples surface area (0.01m2/g to no upper limit) and pore size data (0.35 to 500nm). With 2 pretreatment ports and 2 analyzing ports which can work simutaneously and separately. Stainless stell manifold system, Germany brand built-in vacuum pump, Swiss brand pressure transducers and stainlesss steel Dewar etc excellecnt accessories, more important, plus affordable price than USA and Japan products make us abtained this order from customer. Further, engineer onsite installation and trainging drive out customer worries about after sale service. Here are few pictures about onsite installation and training.


 

For more information about surface area and pore size analyzer, gas pycnometer helium density analyzer, high pressure volumetric adsorption analyzer etc, pls visit www.jinaipu.com or email us at sales@jinaipu.com.

2017年2月16日星期四

物理吸附仪厂家-金埃谱科技2016年会圆满落幕


2016年, 金埃谱科技成功研发并供货高温高压物理吸附仪H-Sorb 46002016年,金埃谱科技仪器出口国别数量累计到达30余个;2016年,金埃谱科技实现了出厂台数和销售额的同比翻倍增长;2016年,金埃谱科技继续领跑国内物理吸附仪行业;2016年,对于金埃谱科技来说是硕果累累的一年;2016年,金埃谱科技成绩斐然!为了庆祝这不平凡的2016,金埃谱科技北京、武汉和南京三地全体员工欢聚北京共同举办2016年会。


 

年会活动定位于温泉、会议、商务、休闲及度假于一体的度假型五星级会议酒店--北京朗丽兹西山花园酒店。大家酒足饭饱之后,来到各式各样的温泉池开始尽情放松自己,可以在藏药池舒经活络、消炎止痛,也可以在健腰池健脾补肾、滋补强身,也可以在无边际泳池痛快畅游、肆意遨游。当然,嗨歌一番也是必备的活动,能够彻底释放累积的压力,摆脱疲惫。


次晨,全体员工参加了年终会议。夏总规划了2017年公司的发展方向,并且指出为了跟上时代要求,更高效有序的工作和服务客户,金埃谱科技会陆续上线CRMERP系统。同时,为了增加市场竞争力以及扩大物理吸附仪产品线,2017年金埃谱科技会推出多款新产品,期待到时与新老用户见面!陈总主要总结了2016年仪器出厂台数,华北、华中和华东各个区域销售业绩和所占比例,较2015年均实现了极大的增幅,获得阵阵掌声。经过此次年会,所有人员被2016年的成绩所鼓舞、大家士气倍增,誓言2017开创佳绩。事后,大家合影全家福,留作纪念。




北京金埃谱科技有限公司研发、生产和销售物理吸附仪,包括BET比表面积仪、比表面积及孔径分析仪、真密度仪、高温高压气体吸附仪等。广泛应用于各类材料物理性能的表征的测定。完全遵循国标及国际标准,测试精度与国外同类品牌保持高度一致。拥有诸多国内外的科研机构、高校实验室、生产企业用户。咨询更多信息请登录www.jinaipu.com或致电北京总部010-88099139,武汉分公司027-59712850或南京办事处025-58491095.

国产比表面积测定仪助力泰国师生永攀科研高峰


2016年末之时,金埃谱科技与泰国玛希隆大学签订供应比表面积测定仪的合同,这表明国产比表面积测定仪受到泰国高等学府的信赖。对于金埃谱科技来说也是具有里程碑式的深刻意义,因为我们的仪器出口国别数量累计达到了30个!

 

此次出口泰国的国产比表面积测定仪型号为V-Sorb 2800P,该仪器具有两站测试位和两站处理位,能够同时进行测试和样品处理,对于单点和多点BET比表面积、BJH中孔分布数据以及HK等微孔的测试具有极高的精确度和数据重复性。玛希隆大学购买此仪器的主要用途是科研使用,平时也兼顾研究生制备的各式各样的样品测试及实践教学使用。下面图片是仪器安装、调试和培训的现场图。





玛希隆大学是泰国最古老的高等教育机构,始建于1889年,前身是诗里拉皇家医学院。在医学、公共医疗卫生和自然科学领域享有盛誉,于1969年以“泰国现代医学和公共医疗卫生事业之父”——玛希隆.宋卡拉王子的名字命名。国立玛希隆大学目前已成为以医学为主的综合性、多学科国际性知名大学。学校设有3个附属医院,14个系,7个研究所,6个学院以及多个国际学术研究中心。

 

北京金埃谱科技有限公司研发、生产和销售物理吸附仪,包括比表面积测定仪、比表面积及孔径分析仪、真密度仪、高温高压气体吸附仪等。广泛应用于各类材料物理性能的表征的测定。完全遵循国标及国际标准,测试精度与国外同类品牌保持高度一致。拥有诸多国内外的科研机构、高校实验室、生产企业用户。咨询更多信息请登录www.jinaipu.com或致电北京总部010-88099139,武汉分公司027-59712850或南京办事处025-58491095.

High Pressure Adsorption Analyzer Agreement Signed with Korea Institute of Energy Research


Gold APP Instruments Corporation China signed an agreement about high pressure gas adsorption analyzer with Korea Institute of Energy Research (KIER) in Aug. 2016 under significantly helps from smart technology company who deal with scientifically instruments suppling and serving for Korea market.

 

In the beginning, KIER wanted one example report of LaNi5 material and also checked analyzing pressure and temperature conditions with us. After read the LaNi5 sample report, KIER decided to purchase one set H-Sorb 2600 high pressure adsorption analyzer from us.

 

Since the founding in 1977, the KIER has had focused on energy technology R&D which is closely related with living standards and national security. KIER's R&D areas include improving efficiency and securing environment-friendly way in use of limited conventional energy resources such as oil, coal as well as natural gas and exploring new energy sources such as solar, wind and water as well as its commercialization.

 

The H-Sorb 2600 high pressure adsorption analyzer designs with 2 analysis ports and 2 degassing ports, can work simultaneously without interruption of each function. Its testing pressure can up to 200Bar and temperature up to 600 Celsius. Fully automatic operation with helps of many imported parts make it to be a popular and advanced instrument in gas adsorption field, especially under high pressure condition. Below is a picture from KIER lab after it well installed and calibrated.